Skip to main content
6 Arizona Painting Specifications

Thorough Preparation & Named Desert Coatings on Every Surface

Every Golden Brush Painting project is measured and supervised personally by owner Adriana, backed by itemized written proposals and two full finish coats.

Direct Supervision by Adriana7-Step PCA Arizona Prep StandardSherwin-Williams & Dunn-Edwards 100% AcrylicsEnglish & Español (Hablamos Español)
6 Deep-Dive Specifications

Six Technical Scope Specifications

Open any specification below for substrate prep stages, alkali and stain primers, Sherwin-Williams and Dunn-Edwards coating tiers, and Arizona FAQs.

Exterior Stucco & Trim
Exterior Stucco & Trim2 – 4 Days

Exterior Stucco & Trim

Engineered for Sonoran Desert UV exposure, monsoon dust, and East Valley HOA palettes

Every exterior repaint begins with a 3,000 PSI wash to remove chalking and desert dust, scraping sun-baked wood fascia, bridging stucco hairline cracks around window pop-outs, priming chalky or bare surfaces, and applying two uniform spray and back-rolled 100% acrylic coats.

  • 3,000 PSI pressure wash across all stucco elevations, eaves, and masonry to remove oxidation and monsoon dust.
  • Full masking of windows, roof tiles, stone veneer, pavers, exterior lighting, and desert plants.
  • Elastomeric crack bridging around window pop-outs, parapet caps, and stucco expansion joints, plus scraping flaking wood fascia.
Coating spec: Sherwin-Williams SuperPaint, Duration Exterior, or Emerald Rain Refresh (100% Acrylic)
Interior Painting & Drywall
Interior Walls & Drywall1 – 3 Days

Interior Painting & Drywall

Laser-sharp cut lines, complete furniture masking, texture-matched drywall patching, and washable low-VOC paints

Whether refreshing lived-in family rooms or completing a whole-home repaint before move-in day, we cover every floor, countertop, and fixture first, repair nail holes and drywall seams, scuff-sand trim, and apply two uniform washable coats.

  • Complete masking of tile, hardwood, and carpet floors, furniture, countertops, and ceiling fans.
  • Drywall nail hole filling, corner bead and tape seam repair, and orange-peel or knockdown texture matching.
  • Caulking gaps along baseboards and door casings plus scuff-sanding glossy trim for lasting enamel adhesion.
Coating spec: Sherwin-Williams Cashmere, SuperPaint Interior, Duration Home, or Emerald Washable Matte / Eggshell
Cabinet Refinishing
Cabinet Refinishing3 – 5 Days

Cabinet Refinishing

Degreased, sanded, tannin-blocked, and finished in hard-curing KCMA-rated urethane cabinet enamels

Update dated oak, maple, or espresso cabinetry without the cost and demolition of a full kitchen tear-out. Doors and drawer fronts are labeled, degreased, mechanically sanded, primed with high-bond stain blocker, and sprayed for a smooth, wipeable finish.

  • Hardware removal, hinge labeling by opening, and full dust-barrier masking of appliances, countertops, and floors.
  • Industrial kitchen degreasing around cooking zones followed by multi-grit mechanical sanding and tack-cloth cleaning.
  • Grain-filling where requested and high-adhesion shellac or alkyd stain-blocking primer to stop wood tannin bleed.
Coating spec: Sherwin-Williams Gallery Series Waterborne Topcoat or Emerald Urethane Trim Enamel
Commercial & HOA Painting
Commercial & HOA1 – 5 Days

Commercial & HOA Painting

Clear itemized proposals, off-hours scheduling options, low-odor coatings, and direct owner coordination

Property managers, business owners, and community boards rely on clear communication and punctual crews. Adriana coordinates phased work zones, weekend or evening interior shifts, CMU perimeter block wall repaints, and wrought-iron fence maintenance so tenants and guests experience minimal disruption.

  • Site walkthrough with property management to map phased work zones, parking access, and tenant safety signage.
  • Pressure washing, efflorescence treatment on irrigated CMU perimeter walls, and elastomeric stucco patching.
  • Rust-inhibitive metal priming on common-area wrought-iron fencing, handrails, and utility enclosures.
Coating spec: Sherwin-Williams ProMar 200 Zero-VOC, Scuff Tuff Interior, and Loxon Masonry Conditioning Systems
Garage Epoxy & Patio Coatings
Garage Epoxy & Patios1 – 2 Days

Garage Epoxy & Patio Coatings

Mechanical concrete profiling, crack patching, full-broadcast decorative flake systems, and UV-stable polyaspartic topcoats

Arizona summer tires reach extreme temperatures that peel DIY hardware-store floor kits within months. We mechanically grind the concrete slab to open its pores, repair divots and expansion cracks, apply a deep-penetrating base coat with decorative flake broadcast, and seal with a chemical- and UV-resistant topcoat.

  • Degreasing oil spots and mechanical diamond-grinding (CSP-2 profile) across the concrete slab and stem walls.
  • HEPA vacuum dust extraction followed by rigid polyurea or epoxy filler in spalls, divots, and slab cracks.
  • Moisture-vapor check and high-solids penetrating base coat with uniform decorative vinyl flake broadcast.
Coating spec: Sherwin-Williams Armorseal / General Polymers High-Solids Epoxy & UV-Stable Polyaspartic Clear Topcoat
Surface Prep & Stucco Repair
Surface Prep & Stucco1 – 3 Days

Surface Prep & Stucco Repair

Because lasting Arizona paint performance is 80% preparation before a single finish coat goes on

Thermal expansion, intense afternoon UV on West elevations, and irrigation moisture cause stucco cracks, chalky walls, efflorescence, and peeling roofline wood. We restore damaged substrates, match Spanish Lace, Knockdown, or Santa Fe stucco textures, prime thoroughly, and repaint cleanly.

  • Inspection and removal of loose, delaminated stucco around parapet walls, hose bibs, and foam window pop-outs.
  • Elastomeric patching and texture blending across Heavy Spanish Lace, Medium Knockdown, and Smooth Santa Fe finishes.
  • Scraping, feather-sanding, and oil/alkyd wood priming on sun-damaged roofline fascia boards and soffit eaves.
Coating spec: Dunn-Edwards Eff-Stop Premium Sealer, Smooth/Textured Elastomeric Patch, and Spartashield / Evershield Finish
Adriana's 5 Core Flyer Services

Five Core Residential & Commercial Pillars

From single interior rooms and full residential repaints to commercial suites and sun-damaged fascia restoration, every core pillar links directly to its technical scope.

Interior Painting1 – 3 Days

Living rooms, bedrooms, vaulted ceilings, baseboards, and interior doors with full floor and furniture protection.

  • Surface preparation: Complete floor and furniture masking, drywall nail-hole and seam repair, caulking baseboards, and stain priming.
Coating spec: Recommended finish: Low-VOC washable matte/eggshell walls with urethane semi-gloss or satin trim enamel.
Exterior Stucco & Trim2 – 4 Days

3,000 PSI wash, elastomeric stucco crack bridging, alkali sealer, and two UV-resistant 100% acrylic coats.

  • Surface preparation: 3,000 PSI wash, elastomeric window pop-out crack bridging, peeling fascia scraping, and South/West alkali sealer.
Coating spec: Recommended finish: Two spray and back-rolled coats of Sherwin-Williams or Dunn-Edwards 100% acrylic desert paint.
Commercial & HOA1 – 5 Days

Offices, medical suites, retail storefronts, and HOA common walls scheduled cleanly around operating hours.

  • Surface preparation: Phased work-zone containment, Zero-VOC corridor prep, CMU efflorescence removal, and metal rust priming.
Coating spec: Recommended finish: Scuff-resistant commercial acrylics, Loxon/Eff-Stop masonry systems, and direct-to-metal enamels.
Cabinet Refinishing3 – 5 Days

Kitchen perimeters, two-tone islands, and bathroom vanities degreased, primed, and sprayed with urethane cabinet enamel.

  • Surface preparation: Numbered door and hinge removal, kitchen degreasing, multi-grit mechanical sanding, and tannin-blocking primer.
Coating spec: Recommended finish: Two factory-smooth atomized coats of KCMA-rated urethane cabinet enamel (Gallery Series / Emerald Urethane).
Surface Prep & Stucco1 – 3 Days

Drywall patching, texture matching, peeling fascia scraping, stucco trench and pop-out repair, and stain-blocking primer.

  • Surface preparation: Stucco routing and texture blending, sun-damaged wood fascia restoration, drywall patching, and full stain/alkali sealing.
Coating spec: Recommended finish: Dedicated alkali/oil primers followed by two uniform color-matched finish coats.
PCA Field Standard • Stucco Texture Math

Arizona Stucco Texture Multipliers & Gallon Spread Rates

Textured desert stucco has significantly more surface area than flat drywall. We apply Painting Contractors Association (PCA) multipliers so your home receives full, unthinned two-coat film build.

Smooth Santa Fe Stucco

1.05x
285 sq ft / gal per coat

Elastomeric hairline smoothing + two fine-nap back-rolled 100% acrylic coats

Medium Sand / Knockdown Stucco

1.15x
250 sq ft / gal per coat

3,000 PSI wash + alkali conditioner on West walls + two spray and back-rolled coats

Heavy Spanish Lace Stucco

1.25x
225 sq ft / gal per coat

Heavy-nap (3/4 in. – 1 in.) back-rolling on first coat to seal deep stucco pockets

Arizona Slump Block & Porous CMU

1.30x
185 sq ft / gal per coat

Efflorescence wire-brushing + pH-blocking masonry sealer + breathable acrylic finish

7-Stage Surface Preparation Comparison

Why Two Painting Quotes Rarely Include the Same Work

Compare every preparation step included in our written scope against the shortcuts low-bid crews skip to finish in a single afternoon.

STEP 01 OF 07

1. Substrate Wash & Degreasing

Golden Brush 7-Step Standard

Full 3,000 PSI pressure wash on exterior stucco and eaves with proper dry time. Chemical degreasing on interior trim and kitchen cabinets.

Splash-and-Dash Cut-Corners

Quick leaf-blower dust-off or light garden-hose rinse, painting straight over monsoon dirt and kitchen oils.

What Happens After 2 Arizona Summers: Topcoat blisters and peels in sheets on sun-struck walls and around cabinet pulls.
STEP 02 OF 07

2. Masking & Property Protection

Golden Brush 7-Step Standard

Heavy drop cloths, taped window glass, covered roof tiles, paver walkways, hardware, stone veneer, and breathable covers on desert landscaping.

Splash-and-Dash Cut-Corners

Flimsy plastic tossed loosely, handheld cardboard shields, and scorched agave or bougainvillea under plastic tarps.

What Happens After 2 Arizona Summers: Permanent overspray haze on dual-pane low-E windows, travertine pavers, and Coach lights.
STEP 03 OF 07

3. Stucco Crack & Drywall Repair

Golden Brush 7-Step Standard

Routing wider stucco cracks, flexible elastomeric bridging on foam window pop-outs, and texture-matched Spanish Lace, Knockdown, or orange-peel patches.

Splash-and-Dash Cut-Corners

Painting straight over hairline cracks or smearing flat spackle across textured walls without blending.

What Happens After 2 Arizona Summers: Cracks reopen on the first 105°F week and flat patches flash visibly whenever sunlight hits the wall.
Adriana
Beautiful Spaces. Lasting Impressions.

Need a Written Estimate or Project Cost Breakdown?

Use our online Project Budget Planner or call (480) 304-0705 to schedule your free on-site estimate.